{
  "spec_version": 1,
  "slug": "siemens-climatix-ahu-v33",
  "manufacturer": "Siemens",
  "model": "Climatix POL638 / POL687 with AHU application V3.3x",
  "category": "HVAC controller",
  "supplier_url": "https://support.industry.siemens.com/cs/document/109818214",
  "default_configuration": {
    "protocol": "modbus_tcp",
    "port": 502,
    "unit_id": 1,
    "addressing": "one_based",
    "byte_order": "BigEndian",
    "word_order": "HighFirst"
  },
  "coils": [],
  "discrete_inputs": [],
  "input_registers": [
    {
      "address": 1,
      "count": 1,
      "name": "General status (word 1)",
      "data_type": "Binary",
      "units": "",
      "scale_factor": 1,
      "offset": 0,
      "access": "R",
      "description": "3x0001. Bit 0 alarm class danger (A), 1 alarm class critical (A), 2 alarm class low (B), 3 alarm class warning (C), 8 manual control active, 9 summer mode, 10 communication test pulse, 11 preheating heating register, 12 preheating extra heating register, 14 actual control mode temperature room, 15 actual control mode temperature exhaust."
    },
    {
      "address": 2,
      "count": 1,
      "name": "General status (word 2)",
      "data_type": "Binary",
      "units": "",
      "scale_factor": 1,
      "offset": 0,
      "access": "R",
      "description": "3x0002. Bit 0/1 actual control mode humidity room/supply; the remaining bits are reserved."
    },
    {
      "address": 3,
      "count": 1,
      "name": "General status (word 3)",
      "data_type": "Binary",
      "units": "",
      "scale_factor": 1,
      "offset": 0,
      "access": "R",
      "description": "3x0003. Reserved bits of the general status block."
    },
    {
      "address": 4,
      "count": 1,
      "name": "General status (word 4)",
      "data_type": "Binary",
      "units": "",
      "scale_factor": 1,
      "offset": 0,
      "access": "R",
      "description": "3x0004. Reserved bits of the general status block."
    },
    {
      "address": 5,
      "count": 1,
      "name": "Digital inputs (word 1)",
      "data_type": "Binary",
      "units": "",
      "scale_factor": 1,
      "offset": 0,
      "access": "R",
      "description": "3x0005. Bit 0 emergency stop, 1 external control 1, 2 external control 2, 3 summer/winter changeover, 4 alarm acknowledge, 8 auxiliary input."
    },
    {
      "address": 6,
      "count": 1,
      "name": "Digital inputs (word 2)",
      "data_type": "Binary",
      "units": "",
      "scale_factor": 1,
      "offset": 0,
      "access": "R",
      "description": "3x0006. Bit 0 dampers open, 1 fire dampers open, 2 fire dampers closed, 4 supply fan feedback, 5 exhaust fan feedback."
    },
    {
      "address": 7,
      "count": 1,
      "name": "Digital inputs (word 3)",
      "data_type": "Binary",
      "units": "",
      "scale_factor": 1,
      "offset": 0,
      "access": "R",
      "description": "3x0007. Reserved bits of the digital-input block."
    },
    {
      "address": 8,
      "count": 1,
      "name": "Digital inputs (word 4)",
      "data_type": "Binary",
      "units": "",
      "scale_factor": 1,
      "offset": 0,
      "access": "R",
      "description": "3x0008. Reserved bits of the digital-input block."
    },
    {
      "address": 9,
      "count": 1,
      "name": "Digital outputs (word 1)",
      "data_type": "Binary",
      "units": "",
      "scale_factor": 1,
      "offset": 0,
      "access": "R",
      "description": "3x0009. Bit 0 supply damper, 1 extract damper, 2 fire damper, 4 supply fan running, 5 supply fan off, 6/7/8 supply fan stage 1/2/3, 9 exhaust fan running, 10 exhaust fan off, 11/12/13 exhaust fan stage 1/2/3."
    },
    {
      "address": 10,
      "count": 1,
      "name": "Digital outputs (word 2)",
      "data_type": "Binary",
      "units": "",
      "scale_factor": 1,
      "offset": 0,
      "access": "R",
      "description": "3x0010. Bit 0 cooling pump, 1 cooling DX off, 2/3/4 cooling DX stage 1/2/3, 6 heating recovery pump/command, 8 heating pump, 10 electrical heating off, 11/12/13 electrical heating stage 1/2/3."
    },
    {
      "address": 11,
      "count": 1,
      "name": "Digital outputs (word 3)",
      "data_type": "Binary",
      "units": "",
      "scale_factor": 1,
      "offset": 0,
      "access": "R",
      "description": "3x0011. Bit 0 extra cooling (2) pump, 1 extra cooling (2) DX off, 2/3/4 extra cooling (2) DX stage 1/2/3, 6 extra heating (2) pump, 8 extra electrical heating (2) off, 9/10/11 extra electrical heating (2) stage 1/2/3."
    },
    {
      "address": 12,
      "count": 1,
      "name": "Digital outputs (word 4)",
      "data_type": "Binary",
      "units": "",
      "scale_factor": 1,
      "offset": 0,
      "access": "R",
      "description": "3x0012. Reserved bits of the digital-output block."
    },
    {
      "address": 13,
      "count": 1,
      "name": "Alarms (word 1)",
      "data_type": "Binary",
      "units": "",
      "scale_factor": 1,
      "offset": 0,
      "access": "R",
      "description": "3x0013. Alarm bits of the AHU application (0 = normal, 1 = alarm)."
    },
    {
      "address": 14,
      "count": 1,
      "name": "Alarms (word 2)",
      "data_type": "Binary",
      "units": "",
      "scale_factor": 1,
      "offset": 0,
      "access": "R",
      "description": "3x0014. Alarm bits of the AHU application (0 = normal, 1 = alarm)."
    },
    {
      "address": 15,
      "count": 1,
      "name": "Alarms (word 3)",
      "data_type": "Binary",
      "units": "",
      "scale_factor": 1,
      "offset": 0,
      "access": "R",
      "description": "3x0015. Alarm bits of the AHU application (0 = normal, 1 = alarm)."
    },
    {
      "address": 16,
      "count": 1,
      "name": "Alarms (word 4)",
      "data_type": "Binary",
      "units": "",
      "scale_factor": 1,
      "offset": 0,
      "access": "R",
      "description": "3x0016. Alarm bits of the AHU application (0 = normal, 1 = alarm)."
    },
    {
      "address": 38,
      "count": 1,
      "name": "Heat recovery damper output signal",
      "data_type": "UInt16",
      "units": "%",
      "scale_factor": 1,
      "offset": 0,
      "access": "R",
      "description": "3x0038. Output signal 0...100 %."
    },
    {
      "address": 39,
      "count": 1,
      "name": "Heat recovery damper recovery",
      "data_type": "UInt16",
      "units": "%",
      "scale_factor": 1,
      "offset": 0,
      "access": "R",
      "description": "3x0039. Actual recovery degree 0...100 %."
    },
    {
      "address": 40,
      "count": 1,
      "name": "Heating output signal",
      "data_type": "UInt16",
      "units": "%",
      "scale_factor": 1,
      "offset": 0,
      "access": "R",
      "description": "3x0040. Output signal 0...100 %."
    },
    {
      "address": 41,
      "count": 1,
      "name": "Heating pump command",
      "data_type": "UInt16",
      "units": "",
      "scale_factor": 1,
      "offset": 0,
      "access": "R",
      "description": "3x0041. 0 = off, 1 = on."
    },
    {
      "address": 42,
      "count": 1,
      "name": "Electrical heating output signal",
      "data_type": "UInt16",
      "units": "%",
      "scale_factor": 1,
      "offset": 0,
      "access": "R",
      "description": "3x0042. Output signal 0...100 %."
    },
    {
      "address": 43,
      "count": 1,
      "name": "Electrical heating command",
      "data_type": "UInt16",
      "units": "",
      "scale_factor": 1,
      "offset": 0,
      "access": "R",
      "description": "3x0043. 0 = off, 1 = stage 1, 2 = stage 2, 3 = stage 3."
    },
    {
      "address": 44,
      "count": 1,
      "name": "Cooling 2 output signal",
      "data_type": "UInt16",
      "units": "%",
      "scale_factor": 1,
      "offset": 0,
      "access": "R",
      "description": "3x0044. Output signal 0...100 %."
    },
    {
      "address": 45,
      "count": 1,
      "name": "Cooling 2 pump command",
      "data_type": "UInt16",
      "units": "",
      "scale_factor": 1,
      "offset": 0,
      "access": "R",
      "description": "3x0045. 0 = off, 1 = on."
    },
    {
      "address": 46,
      "count": 1,
      "name": "Cooling 2 DX command",
      "data_type": "UInt16",
      "units": "",
      "scale_factor": 1,
      "offset": 0,
      "access": "R",
      "description": "3x0046. 0 = off, 1...3 = stage 1...3."
    },
    {
      "address": 47,
      "count": 1,
      "name": "Heating 2 output signal",
      "data_type": "UInt16",
      "units": "%",
      "scale_factor": 1,
      "offset": 0,
      "access": "R",
      "description": "3x0047. Output signal 0...100 %."
    },
    {
      "address": 48,
      "count": 1,
      "name": "Heating 2 pump command",
      "data_type": "UInt16",
      "units": "",
      "scale_factor": 1,
      "offset": 0,
      "access": "R",
      "description": "3x0048. 0 = off, 1 = on."
    },
    {
      "address": 49,
      "count": 1,
      "name": "Electrical heating 2 output signal",
      "data_type": "UInt16",
      "units": "%",
      "scale_factor": 1,
      "offset": 0,
      "access": "R",
      "description": "3x0049. Output signal 0...100 %."
    },
    {
      "address": 50,
      "count": 1,
      "name": "Electrical heating 2 command",
      "data_type": "UInt16",
      "units": "",
      "scale_factor": 1,
      "offset": 0,
      "access": "R",
      "description": "3x0050. 0 = off, 1...3 = stage 1...3."
    },
    {
      "address": 52,
      "count": 1,
      "name": "Humidifier output signal",
      "data_type": "UInt16",
      "units": "%",
      "scale_factor": 1,
      "offset": 0,
      "access": "R",
      "description": "3x0052. Output signal 0...100 %."
    },
    {
      "address": 53,
      "count": 1,
      "name": "Humidifier command",
      "data_type": "UInt16",
      "units": "",
      "scale_factor": 1,
      "offset": 0,
      "access": "R",
      "description": "3x0053. 0 = off, 1 = on."
    },
    {
      "address": 54,
      "count": 1,
      "name": "Humidifier pump command",
      "data_type": "UInt16",
      "units": "",
      "scale_factor": 1,
      "offset": 0,
      "access": "R",
      "description": "3x0054. 0 = off, 1 = on."
    },
    {
      "address": 55,
      "count": 1,
      "name": "Actual dehumidity value",
      "data_type": "UInt16",
      "units": "%",
      "scale_factor": 1,
      "offset": 0,
      "access": "R",
      "description": "3x0055. 0...100 %."
    },
    {
      "address": 57,
      "count": 1,
      "name": "Auxiliary operation mode output",
      "data_type": "UInt16",
      "units": "",
      "scale_factor": 1,
      "offset": 0,
      "access": "R",
      "description": "3x0057. 0 = off, 1 = on."
    },
    {
      "address": 58,
      "count": 1,
      "name": "Auxiliary time switch program output",
      "data_type": "UInt16",
      "units": "",
      "scale_factor": 1,
      "offset": 0,
      "access": "R",
      "description": "3x0058. 0 = off, 1 = on."
    },
    {
      "address": 59,
      "count": 1,
      "name": "Auxiliary analog output fan",
      "data_type": "UInt16",
      "units": "%",
      "scale_factor": 1,
      "offset": 0,
      "access": "R",
      "description": "3x0059. 0...100 %."
    },
    {
      "address": 60,
      "count": 1,
      "name": "Alarm output 1",
      "data_type": "UInt16",
      "units": "",
      "scale_factor": 1,
      "offset": 0,
      "access": "R",
      "description": "3x0060. 0 = normal, 1 = alarm."
    },
    {
      "address": 61,
      "count": 1,
      "name": "Alarm output 2",
      "data_type": "UInt16",
      "units": "",
      "scale_factor": 1,
      "offset": 0,
      "access": "R",
      "description": "3x0061. 0 = normal, 1 = alarm."
    },
    {
      "address": 62,
      "count": 1,
      "name": "Supply filter pressure",
      "data_type": "UInt16",
      "units": "Pa",
      "scale_factor": 1,
      "offset": 0,
      "access": "R",
      "description": "3x0062. Supply filter differential pressure in Pa."
    },
    {
      "address": 63,
      "count": 1,
      "name": "Exhaust filter pressure",
      "data_type": "UInt16",
      "units": "Pa",
      "scale_factor": 1,
      "offset": 0,
      "access": "R",
      "description": "3x0063. Exhaust filter differential pressure in Pa."
    },
    {
      "address": 64,
      "count": 1,
      "name": "Actual air quality compensation",
      "data_type": "UInt16",
      "units": "%",
      "scale_factor": 1,
      "offset": 0,
      "access": "R",
      "description": "3x0064. 0...100 %."
    },
    {
      "address": 65,
      "count": 1,
      "name": "Actual fan cooling value",
      "data_type": "UInt16",
      "units": "%",
      "scale_factor": 1,
      "offset": 0,
      "access": "R",
      "description": "3x0065. 0...100 %."
    },
    {
      "address": 66,
      "count": 1,
      "name": "Actual fan heating value",
      "data_type": "UInt16",
      "units": "%",
      "scale_factor": 1,
      "offset": 0,
      "access": "R",
      "description": "3x0066. 0...100 %."
    },
    {
      "address": 67,
      "count": 1,
      "name": "Actual fan compensation temperature",
      "data_type": "UInt16",
      "units": "%",
      "scale_factor": 1,
      "offset": 0,
      "access": "R",
      "description": "3x0067. 0...100 %."
    },
    {
      "address": 68,
      "count": 1,
      "name": "Actual fan compensation humidity",
      "data_type": "UInt16",
      "units": "%",
      "scale_factor": 1,
      "offset": 0,
      "access": "R",
      "description": "3x0068. 0...100 %."
    },
    {
      "address": 69,
      "count": 1,
      "name": "Actual summer compensation fan",
      "data_type": "UInt16",
      "units": "%",
      "scale_factor": 1,
      "offset": 0,
      "access": "R",
      "description": "3x0069. 0...100 %."
    },
    {
      "address": 70,
      "count": 1,
      "name": "Actual winter compensation fan",
      "data_type": "UInt16",
      "units": "%",
      "scale_factor": 1,
      "offset": 0,
      "access": "R",
      "description": "3x0070. 0...100 %."
    },
    {
      "address": 71,
      "count": 1,
      "name": "Actual operating state",
      "data_type": "UInt16",
      "units": "",
      "scale_factor": 1,
      "offset": 0,
      "access": "R",
      "description": "3x0071. 0 = not used, 1 = configuration, 2 = fire, 3 = alarm class 0, 4 = emergency stop, 5 = alarm class 1, 6 = fire-damper test, 7 = manual control, 8 = external control, 9 = room unit, 10 = OSSTP, 11 = unoccupied heating/cooling, 12 = free cooling, 13 = BMS control, 14 = TSP control, 15 = temperature test, 16 = calendar."
    },
    {
      "address": 72,
      "count": 1,
      "name": "Outside air temperature",
      "data_type": "Int16",
      "units": "°C",
      "scale_factor": 0.1,
      "offset": 0,
      "access": "R",
      "description": "3x0072. Signed word, factor 10."
    },
    {
      "address": 73,
      "count": 1,
      "name": "Supply air temperature",
      "data_type": "Int16",
      "units": "°C",
      "scale_factor": 0.1,
      "offset": 0,
      "access": "R",
      "description": "3x0073. Signed word, factor 10."
    },
    {
      "address": 74,
      "count": 1,
      "name": "Heating frost temperature",
      "data_type": "Int16",
      "units": "°C",
      "scale_factor": 0.1,
      "offset": 0,
      "access": "R",
      "description": "3x0074. Signed word, factor 10."
    },
    {
      "address": 75,
      "count": 1,
      "name": "Actual room temperature",
      "data_type": "Int16",
      "units": "°C",
      "scale_factor": 0.1,
      "offset": 0,
      "access": "R",
      "description": "3x0075. Signed word, factor 10."
    },
    {
      "address": 76,
      "count": 1,
      "name": "Exhaust air temperature",
      "data_type": "Int16",
      "units": "°C",
      "scale_factor": 0.1,
      "offset": 0,
      "access": "R",
      "description": "3x0076. Signed word, factor 10."
    },
    {
      "address": 77,
      "count": 1,
      "name": "Extract air temperature",
      "data_type": "Int16",
      "units": "°C",
      "scale_factor": 0.1,
      "offset": 0,
      "access": "R",
      "description": "3x0077. Signed word, factor 10."
    },
    {
      "address": 78,
      "count": 1,
      "name": "Heat recovery supply air temperature",
      "data_type": "Int16",
      "units": "°C",
      "scale_factor": 0.1,
      "offset": 0,
      "access": "R",
      "description": "3x0078. Signed word, factor 10."
    },
    {
      "address": 79,
      "count": 1,
      "name": "Heat recovery water temperature",
      "data_type": "Int16",
      "units": "°C",
      "scale_factor": 0.1,
      "offset": 0,
      "access": "R",
      "description": "3x0079. Signed word, factor 10."
    },
    {
      "address": 80,
      "count": 1,
      "name": "Supply air temperature 2",
      "data_type": "Int16",
      "units": "°C",
      "scale_factor": 0.1,
      "offset": 0,
      "access": "R",
      "description": "3x0080. Signed word, factor 10."
    },
    {
      "address": 81,
      "count": 1,
      "name": "Heating 2 frost temperature",
      "data_type": "Int16",
      "units": "°C",
      "scale_factor": 0.1,
      "offset": 0,
      "access": "R",
      "description": "3x0081. Signed word, factor 10."
    },
    {
      "address": 82,
      "count": 1,
      "name": "Auxiliary temperature",
      "data_type": "Int16",
      "units": "°C",
      "scale_factor": 0.1,
      "offset": 0,
      "access": "R",
      "description": "3x0082. Signed word, factor 10."
    },
    {
      "address": 84,
      "count": 1,
      "name": "Outside air relative humidity",
      "data_type": "UInt16",
      "units": "%",
      "scale_factor": 1,
      "offset": 0,
      "access": "R",
      "description": "3x0084. 0...100 %rH."
    },
    {
      "address": 85,
      "count": 1,
      "name": "Outside air absolute humidity",
      "data_type": "Int16",
      "units": "g/kg",
      "scale_factor": 0.1,
      "offset": 0,
      "access": "R",
      "description": "3x0085. Factor 10."
    },
    {
      "address": 86,
      "count": 1,
      "name": "Outside air enthalpy",
      "data_type": "Int16",
      "units": "kJ/kg",
      "scale_factor": 0.1,
      "offset": 0,
      "access": "R",
      "description": "3x0086. Factor 10."
    },
    {
      "address": 87,
      "count": 1,
      "name": "Supply air relative humidity",
      "data_type": "UInt16",
      "units": "%",
      "scale_factor": 1,
      "offset": 0,
      "access": "R",
      "description": "3x0087. 0...100 %rH."
    },
    {
      "address": 88,
      "count": 1,
      "name": "Supply air absolute humidity",
      "data_type": "Int16",
      "units": "g/kg",
      "scale_factor": 0.1,
      "offset": 0,
      "access": "R",
      "description": "3x0088. Factor 10."
    },
    {
      "address": 89,
      "count": 1,
      "name": "Supply air enthalpy",
      "data_type": "Int16",
      "units": "kJ/kg",
      "scale_factor": 0.1,
      "offset": 0,
      "access": "R",
      "description": "3x0089. Factor 10."
    },
    {
      "address": 90,
      "count": 1,
      "name": "Room relative humidity",
      "data_type": "UInt16",
      "units": "%",
      "scale_factor": 1,
      "offset": 0,
      "access": "R",
      "description": "3x0090. 0...100 %rH."
    },
    {
      "address": 91,
      "count": 1,
      "name": "Room absolute humidity",
      "data_type": "Int16",
      "units": "g/kg",
      "scale_factor": 0.1,
      "offset": 0,
      "access": "R",
      "description": "3x0091. Factor 10."
    },
    {
      "address": 92,
      "count": 1,
      "name": "Room enthalpy",
      "data_type": "Int16",
      "units": "kJ/kg",
      "scale_factor": 0.1,
      "offset": 0,
      "access": "R",
      "description": "3x0092. Factor 10."
    },
    {
      "address": 93,
      "count": 1,
      "name": "Dew point",
      "data_type": "Int16",
      "units": "°C",
      "scale_factor": 0.1,
      "offset": 0,
      "access": "R",
      "description": "3x0093. Factor 10."
    },
    {
      "address": 95,
      "count": 1,
      "name": "Supply air flow",
      "data_type": "UInt16",
      "units": "l/s",
      "scale_factor": 1,
      "offset": 0,
      "access": "R",
      "description": "3x0095. Supply air flow in l/s."
    },
    {
      "address": 96,
      "count": 1,
      "name": "Exhaust air flow",
      "data_type": "UInt16",
      "units": "l/s",
      "scale_factor": 1,
      "offset": 0,
      "access": "R",
      "description": "3x0096. Exhaust air flow in l/s."
    },
    {
      "address": 97,
      "count": 1,
      "name": "Supply air pressure",
      "data_type": "UInt16",
      "units": "Pa",
      "scale_factor": 1,
      "offset": 0,
      "access": "R",
      "description": "3x0097. Supply duct pressure in Pa."
    },
    {
      "address": 98,
      "count": 1,
      "name": "Exhaust air pressure",
      "data_type": "UInt16",
      "units": "Pa",
      "scale_factor": 1,
      "offset": 0,
      "access": "R",
      "description": "3x0098. Exhaust duct pressure in Pa."
    },
    {
      "address": 99,
      "count": 1,
      "name": "Heat recovery frost pressure",
      "data_type": "UInt16",
      "units": "Pa",
      "scale_factor": 1,
      "offset": 0,
      "access": "R",
      "description": "3x0099. Heat-recovery frost protection pressure in Pa."
    },
    {
      "address": 101,
      "count": 1,
      "name": "Air quality",
      "data_type": "UInt16",
      "units": "ppm",
      "scale_factor": 1,
      "offset": 0,
      "access": "R",
      "description": "3x0101. Air-quality sensor value in ppm."
    },
    {
      "address": 102,
      "count": 1,
      "name": "External setpoint",
      "data_type": "Int16",
      "units": "°C",
      "scale_factor": 0.1,
      "offset": 0,
      "access": "R",
      "description": "3x0102. External setpoint, factor 10."
    },
    {
      "address": 104,
      "count": 1,
      "name": "Actual heating setpoint, main",
      "data_type": "Int16",
      "units": "°C",
      "scale_factor": 0.1,
      "offset": 0,
      "access": "R",
      "description": "3x0104. Depends on the actual control mode; factor 10."
    },
    {
      "address": 105,
      "count": 1,
      "name": "Actual cooling setpoint, main",
      "data_type": "Int16",
      "units": "°C",
      "scale_factor": 0.1,
      "offset": 0,
      "access": "R",
      "description": "3x0105. Depends on the actual control mode; factor 10."
    },
    {
      "address": 106,
      "count": 1,
      "name": "Actual supply heating setpoint",
      "data_type": "Int16",
      "units": "°C",
      "scale_factor": 0.1,
      "offset": 0,
      "access": "R",
      "description": "3x0106. Used with cascade control; factor 10."
    },
    {
      "address": 107,
      "count": 1,
      "name": "Actual supply cooling setpoint",
      "data_type": "Int16",
      "units": "°C",
      "scale_factor": 0.1,
      "offset": 0,
      "access": "R",
      "description": "3x0107. Used with cascade control; factor 10."
    },
    {
      "address": 108,
      "count": 1,
      "name": "Actual humidity setpoint, main",
      "data_type": "UInt16",
      "units": "%",
      "scale_factor": 0.1,
      "offset": 0,
      "access": "R",
      "description": "3x0108. Factor 10; %rH or g/kg depending on configuration."
    },
    {
      "address": 109,
      "count": 1,
      "name": "Actual dehumidity setpoint, main",
      "data_type": "UInt16",
      "units": "%",
      "scale_factor": 0.1,
      "offset": 0,
      "access": "R",
      "description": "3x0109. Factor 10; %rH or g/kg depending on configuration."
    },
    {
      "address": 110,
      "count": 1,
      "name": "Actual supply humidity setpoint",
      "data_type": "UInt16",
      "units": "%",
      "scale_factor": 0.1,
      "offset": 0,
      "access": "R",
      "description": "3x0110. Cascade control; factor 10."
    },
    {
      "address": 111,
      "count": 1,
      "name": "Actual supply dehumidity setpoint",
      "data_type": "UInt16",
      "units": "%",
      "scale_factor": 0.1,
      "offset": 0,
      "access": "R",
      "description": "3x0111. Cascade control; factor 10."
    },
    {
      "address": 112,
      "count": 1,
      "name": "Actual supply fan setpoint",
      "data_type": "UInt16",
      "units": "%",
      "scale_factor": 1,
      "offset": 0,
      "access": "R",
      "description": "3x0112. %, Pa or l/s depending on the configured engineering unit."
    },
    {
      "address": 113,
      "count": 1,
      "name": "Actual exhaust fan setpoint",
      "data_type": "UInt16",
      "units": "%",
      "scale_factor": 1,
      "offset": 0,
      "access": "R",
      "description": "3x0113. %, Pa or l/s depending on the configured engineering unit."
    },
    {
      "address": 115,
      "count": 1,
      "name": "Actual summer compensation temperature",
      "data_type": "Int16",
      "units": "°C",
      "scale_factor": 0.1,
      "offset": 0,
      "access": "R",
      "description": "3x0115. Factor 10."
    },
    {
      "address": 116,
      "count": 1,
      "name": "Actual winter compensation temperature",
      "data_type": "Int16",
      "units": "°C",
      "scale_factor": 0.1,
      "offset": 0,
      "access": "R",
      "description": "3x0116. Factor 10."
    },
    {
      "address": 117,
      "count": 1,
      "name": "Heat recovery efficiency",
      "data_type": "UInt16",
      "units": "%",
      "scale_factor": 1,
      "offset": 0,
      "access": "R",
      "description": "3x0117. 0...100 %."
    },
    {
      "address": 118,
      "count": 1,
      "name": "Cooling recovery (MECH) active",
      "data_type": "UInt16",
      "units": "",
      "scale_factor": 1,
      "offset": 0,
      "access": "R",
      "description": "3x0118. 0 = passive, 1 = active."
    },
    {
      "address": 120,
      "count": 1,
      "name": "Energy actual power",
      "data_type": "Int16",
      "units": "W",
      "scale_factor": 0.1,
      "offset": 0,
      "access": "R",
      "description": "3x0120. Factor 10."
    },
    {
      "address": 121,
      "count": 1,
      "name": "Energy average power",
      "data_type": "Int16",
      "units": "W",
      "scale_factor": 0.1,
      "offset": 0,
      "access": "R",
      "description": "3x0121. Factor 10."
    },
    {
      "address": 122,
      "count": 1,
      "name": "Energy operating hours",
      "data_type": "Int16",
      "units": "h",
      "scale_factor": 0.1,
      "offset": 0,
      "access": "R",
      "description": "3x0122. Factor 10."
    },
    {
      "address": 123,
      "count": 1,
      "name": "Energy partial",
      "data_type": "Int16",
      "units": "kWh",
      "scale_factor": 0.1,
      "offset": 0,
      "access": "R",
      "description": "3x0123. Factor 10."
    },
    {
      "address": 124,
      "count": 1,
      "name": "Energy total",
      "data_type": "Int16",
      "units": "kWh",
      "scale_factor": 0.1,
      "offset": 0,
      "access": "R",
      "description": "3x0124. Factor 10."
    },
    {
      "address": 125,
      "count": 1,
      "name": "Modbus communication alarm",
      "data_type": "UInt16",
      "units": "",
      "scale_factor": 1,
      "offset": 0,
      "access": "R",
      "description": "3x0125. 0 = OK, 1 = alarm."
    },
    {
      "address": 200,
      "count": 1,
      "name": "Actual room unit mode",
      "data_type": "UInt16",
      "units": "",
      "scale_factor": 1,
      "offset": 0,
      "access": "R",
      "description": "3x0200. 0 = auto, 1 = comfort, 2 = standby, 3 = economy, 4 = off."
    },
    {
      "address": 210,
      "count": 1,
      "name": "Actual room unit setpoint",
      "data_type": "Int16",
      "units": "°C",
      "scale_factor": 0.1,
      "offset": 0,
      "access": "R",
      "description": "3x0210. Factor 10."
    },
    {
      "address": 211,
      "count": 1,
      "name": "Room unit temperature",
      "data_type": "Int16",
      "units": "°C",
      "scale_factor": 0.1,
      "offset": 0,
      "access": "R",
      "description": "3x0211. Factor 10."
    },
    {
      "address": 212,
      "count": 1,
      "name": "Room unit 2 temperature",
      "data_type": "Int16",
      "units": "°C",
      "scale_factor": 0.1,
      "offset": 0,
      "access": "R",
      "description": "3x0212. Factor 10."
    },
    {
      "address": 213,
      "count": 1,
      "name": "Room temperature",
      "data_type": "Int16",
      "units": "°C",
      "scale_factor": 0.1,
      "offset": 0,
      "access": "R",
      "description": "3x0213. Factor 10."
    },
    {
      "address": 214,
      "count": 1,
      "name": "Room 2 temperature",
      "data_type": "Int16",
      "units": "°C",
      "scale_factor": 0.1,
      "offset": 0,
      "access": "R",
      "description": "3x0214. Factor 10."
    },
    {
      "address": 220,
      "count": 1,
      "name": "Time switch type",
      "data_type": "UInt16",
      "units": "",
      "scale_factor": 1,
      "offset": 0,
      "access": "R",
      "description": "3x0220. 0 = none, 1 = step, 2 = step + temperature."
    },
    {
      "address": 221,
      "count": 1,
      "name": "Time switch number of steps",
      "data_type": "UInt16",
      "units": "",
      "scale_factor": 1,
      "offset": 0,
      "access": "R",
      "description": "3x0221. 0 = 1 step, 1 = 2 steps, 2 = 3 steps."
    },
    {
      "address": 222,
      "count": 1,
      "name": "Fan control mode",
      "data_type": "UInt16",
      "units": "",
      "scale_factor": 1,
      "offset": 0,
      "access": "R",
      "description": "3x0222. 0 = direct, 1 = direct variable, 2 = fix speed, 3 = pressure, 4 = flow, 5 = supply slave, 6 = exhaust slave."
    },
    {
      "address": 223,
      "count": 1,
      "name": "Supply engineering unit",
      "data_type": "UInt16",
      "units": "",
      "scale_factor": 1,
      "offset": 0,
      "access": "R",
      "description": "3x0223. 0 = %, 1 = Pa, 2 = l/s."
    },
    {
      "address": 224,
      "count": 1,
      "name": "Exhaust engineering unit",
      "data_type": "UInt16",
      "units": "",
      "scale_factor": 1,
      "offset": 0,
      "access": "R",
      "description": "3x0224. 0 = %, 1 = Pa, 2 = l/s."
    },
    {
      "address": 225,
      "count": 1,
      "name": "Temperature control mode",
      "data_type": "UInt16",
      "units": "",
      "scale_factor": 1,
      "offset": 0,
      "access": "R",
      "description": "3x0225. 0 = supply, 1 = room cascade, 2 = return cascade, 3 = room/supply changeover, 4 = return/supply changeover, 5 = room, 6 = return."
    },
    {
      "address": 226,
      "count": 1,
      "name": "Temperature setpoint selector",
      "data_type": "UInt16",
      "units": "",
      "scale_factor": 1,
      "offset": 0,
      "access": "R",
      "description": "3x0226. 0 = heating + dead zone, 1 = heating/cooling, 2 = setpoint + half dead zone, 3 = cooling - dead zone."
    },
    {
      "address": 227,
      "count": 1,
      "name": "Summer/winter compensation temperature",
      "data_type": "UInt16",
      "units": "",
      "scale_factor": 1,
      "offset": 0,
      "access": "R",
      "description": "3x0227. 0 = no, 1 = yes."
    }
  ],
  "holding_registers": [
    {
      "address": 5,
      "count": 1,
      "name": "BMS control/override time switch program (steps)",
      "data_type": "UInt16",
      "units": "",
      "scale_factor": 1,
      "offset": 0,
      "access": "RW",
      "description": "4x0005. 0 = auto, 1 = off, 2 = stage 1, 3 = stage 2, 4 = stage 3."
    },
    {
      "address": 6,
      "count": 1,
      "name": "BMS control/override time switch program (steps/temperature)",
      "data_type": "UInt16",
      "units": "",
      "scale_factor": 1,
      "offset": 0,
      "access": "RW",
      "description": "4x0006. 0 = auto, 1 = off, 2 = eco stage 1, 3 = comfort stage 1, 4 = eco stage 2, 5 = comfort stage 2, 6 = eco stage 3, 7 = comfort stage 3."
    },
    {
      "address": 7,
      "count": 1,
      "name": "Auxiliary BMS time switch program output",
      "data_type": "UInt16",
      "units": "",
      "scale_factor": 1,
      "offset": 0,
      "access": "RW",
      "description": "4x0007. 0 = auto, 1 = off, 2 = on."
    },
    {
      "address": 8,
      "count": 1,
      "name": "Manual operation (steps)",
      "data_type": "UInt16",
      "units": "",
      "scale_factor": 1,
      "offset": 0,
      "access": "RW",
      "description": "4x0008. 0 = auto, 1 = off, 2...4 = stage 1...3."
    },
    {
      "address": 9,
      "count": 1,
      "name": "Manual operation (steps/temperature)",
      "data_type": "UInt16",
      "units": "",
      "scale_factor": 1,
      "offset": 0,
      "access": "RW",
      "description": "4x0009. 0 = auto, 1 = off, 2 = eco stage 1, 3 = comfort stage 1, 4 = eco stage 2, 5 = comfort stage 2, 6 = eco stage 3, 7 = comfort stage 3."
    },
    {
      "address": 11,
      "count": 1,
      "name": "External control, off delay",
      "data_type": "UInt16",
      "units": "h",
      "scale_factor": 1,
      "offset": 0,
      "access": "RW",
      "description": "4x0011. Off delay in hours."
    },
    {
      "address": 12,
      "count": 1,
      "name": "External control, fan step",
      "data_type": "UInt16",
      "units": "",
      "scale_factor": 1,
      "offset": 0,
      "access": "RW",
      "description": "4x0012. 0 = auto, 1 = off, 2 = 1 step, 3 = 2 steps, 4 = 3 steps."
    },
    {
      "address": 13,
      "count": 1,
      "name": "Room unit presence time",
      "data_type": "UInt16",
      "units": "h",
      "scale_factor": 1,
      "offset": 0,
      "access": "RW",
      "description": "4x0013. 0...23 h."
    },
    {
      "address": 20,
      "count": 1,
      "name": "Comfort temperature setpoint",
      "data_type": "Int16",
      "units": "°C",
      "scale_factor": 0.1,
      "offset": 0,
      "access": "RW",
      "description": "4x0020. Factor 10."
    },
    {
      "address": 21,
      "count": 1,
      "name": "Comfort temperature dead zone",
      "data_type": "Int16",
      "units": "°C",
      "scale_factor": 0.1,
      "offset": 0,
      "access": "RW",
      "description": "4x0021. Factor 10."
    },
    {
      "address": 22,
      "count": 1,
      "name": "Comfort heating setpoint",
      "data_type": "Int16",
      "units": "°C",
      "scale_factor": 0.1,
      "offset": 0,
      "access": "RW",
      "description": "4x0022. Factor 10."
    },
    {
      "address": 23,
      "count": 1,
      "name": "Comfort cooling setpoint",
      "data_type": "Int16",
      "units": "°C",
      "scale_factor": 0.1,
      "offset": 0,
      "access": "RW",
      "description": "4x0023. Factor 10."
    },
    {
      "address": 24,
      "count": 1,
      "name": "Economy temperature setpoint",
      "data_type": "Int16",
      "units": "°C",
      "scale_factor": 0.1,
      "offset": 0,
      "access": "RW",
      "description": "4x0024. Factor 10."
    },
    {
      "address": 25,
      "count": 1,
      "name": "Economy temperature dead zone",
      "data_type": "Int16",
      "units": "°C",
      "scale_factor": 0.1,
      "offset": 0,
      "access": "RW",
      "description": "4x0025. Factor 10."
    },
    {
      "address": 26,
      "count": 1,
      "name": "Economy heating setpoint",
      "data_type": "Int16",
      "units": "°C",
      "scale_factor": 0.1,
      "offset": 0,
      "access": "RW",
      "description": "4x0026. Factor 10."
    },
    {
      "address": 27,
      "count": 1,
      "name": "Economy cooling setpoint",
      "data_type": "Int16",
      "units": "°C",
      "scale_factor": 0.1,
      "offset": 0,
      "access": "RW",
      "description": "4x0027. Factor 10."
    },
    {
      "address": 28,
      "count": 1,
      "name": "Exhaust air temperature setpoint 1 (HOTC)",
      "data_type": "Int16",
      "units": "°C",
      "scale_factor": 0.1,
      "offset": 0,
      "access": "RW",
      "description": "4x0028. Factor 10."
    },
    {
      "address": 29,
      "count": 1,
      "name": "Exhaust air temperature setpoint 2 (HOTC)",
      "data_type": "Int16",
      "units": "°C",
      "scale_factor": 0.1,
      "offset": 0,
      "access": "RW",
      "description": "4x0029. Factor 10."
    },
    {
      "address": 30,
      "count": 1,
      "name": "Supply temperature delta 1 (HOTC)",
      "data_type": "Int16",
      "units": "°C",
      "scale_factor": 0.1,
      "offset": 0,
      "access": "RW",
      "description": "4x0030. Factor 10."
    },
    {
      "address": 31,
      "count": 1,
      "name": "Supply temperature delta 2 (HOTC)",
      "data_type": "Int16",
      "units": "°C",
      "scale_factor": 0.1,
      "offset": 0,
      "access": "RW",
      "description": "4x0031. Factor 10."
    },
    {
      "address": 32,
      "count": 1,
      "name": "Summer/winter changeover supply temperature compensation",
      "data_type": "Int16",
      "units": "°C",
      "scale_factor": 0.1,
      "offset": 0,
      "access": "RW",
      "description": "4x0032. Factor 10."
    },
    {
      "address": 33,
      "count": 1,
      "name": "Extra sequence setpoint",
      "data_type": "Int16",
      "units": "°C",
      "scale_factor": 0.1,
      "offset": 0,
      "access": "RW",
      "description": "4x0033. Factor 10."
    },
    {
      "address": 34,
      "count": 1,
      "name": "Supply temperature minimum setpoint (pure room/exhaust control)",
      "data_type": "Int16",
      "units": "°C",
      "scale_factor": 0.1,
      "offset": 0,
      "access": "RW",
      "description": "4x0034. Factor 10."
    },
    {
      "address": 35,
      "count": 1,
      "name": "Supply temperature maximum setpoint (pure room/exhaust control)",
      "data_type": "Int16",
      "units": "°C",
      "scale_factor": 0.1,
      "offset": 0,
      "access": "RW",
      "description": "4x0035. Factor 10."
    },
    {
      "address": 36,
      "count": 1,
      "name": "Supply temperature minimum setpoint (cascade room/exhaust control)",
      "data_type": "Int16",
      "units": "°C",
      "scale_factor": 0.1,
      "offset": 0,
      "access": "RW",
      "description": "4x0036. Low limit; factor 10."
    },
    {
      "address": 37,
      "count": 1,
      "name": "Supply temperature maximum setpoint (cascade room/exhaust control)",
      "data_type": "Int16",
      "units": "°C",
      "scale_factor": 0.1,
      "offset": 0,
      "access": "RW",
      "description": "4x0037. High limit; factor 10."
    },
    {
      "address": 39,
      "count": 1,
      "name": "Humidity setpoint relative",
      "data_type": "UInt16",
      "units": "%",
      "scale_factor": 1,
      "offset": 0,
      "access": "RW",
      "description": "4x0039. %rH or g/kg depending on configuration."
    },
    {
      "address": 40,
      "count": 1,
      "name": "Humidity dead zone relative",
      "data_type": "UInt16",
      "units": "%",
      "scale_factor": 1,
      "offset": 0,
      "access": "RW",
      "description": "4x0040. %rH or g/kg depending on configuration."
    },
    {
      "address": 41,
      "count": 1,
      "name": "Humidity setpoint relative (2)",
      "data_type": "UInt16",
      "units": "%",
      "scale_factor": 1,
      "offset": 0,
      "access": "RW",
      "description": "4x0041. %rH or g/kg depending on configuration."
    },
    {
      "address": 42,
      "count": 1,
      "name": "Dehumidity setpoint relative",
      "data_type": "UInt16",
      "units": "%",
      "scale_factor": 1,
      "offset": 0,
      "access": "RW",
      "description": "4x0042. %rH or g/kg depending on configuration."
    },
    {
      "address": 43,
      "count": 1,
      "name": "Humidity setpoint absolute",
      "data_type": "UInt16",
      "units": "g/kg",
      "scale_factor": 0.1,
      "offset": 0,
      "access": "RW",
      "description": "4x0043. Factor 10."
    },
    {
      "address": 44,
      "count": 1,
      "name": "Humidity dead zone absolute",
      "data_type": "UInt16",
      "units": "g/kg",
      "scale_factor": 0.1,
      "offset": 0,
      "access": "RW",
      "description": "4x0044. Factor 10."
    },
    {
      "address": 45,
      "count": 1,
      "name": "Humidity setpoint absolute (2)",
      "data_type": "UInt16",
      "units": "g/kg",
      "scale_factor": 0.1,
      "offset": 0,
      "access": "RW",
      "description": "4x0045. Factor 10."
    },
    {
      "address": 46,
      "count": 1,
      "name": "Dehumidity setpoint absolute",
      "data_type": "UInt16",
      "units": "g/kg",
      "scale_factor": 0.1,
      "offset": 0,
      "access": "RW",
      "description": "4x0046. Factor 10."
    },
    {
      "address": 47,
      "count": 1,
      "name": "Supply humidity maximum setpoint (pure room/exhaust control)",
      "data_type": "UInt16",
      "units": "%",
      "scale_factor": 0.1,
      "offset": 0,
      "access": "RW",
      "description": "4x0047. Factor 10; %rH or g/kg."
    },
    {
      "address": 48,
      "count": 1,
      "name": "Supply humidity minimum setpoint (cascade room/exhaust control)",
      "data_type": "UInt16",
      "units": "%",
      "scale_factor": 0.1,
      "offset": 0,
      "access": "RW",
      "description": "4x0048. Factor 10; %rH or g/kg."
    },
    {
      "address": 49,
      "count": 1,
      "name": "Supply humidity maximum setpoint (cascade room/exhaust control)",
      "data_type": "UInt16",
      "units": "%",
      "scale_factor": 0.1,
      "offset": 0,
      "access": "RW",
      "description": "4x0049. Factor 10; %rH or g/kg."
    },
    {
      "address": 50,
      "count": 1,
      "name": "Supply fan step 1 setpoint",
      "data_type": "UInt16",
      "units": "%",
      "scale_factor": 1,
      "offset": 0,
      "access": "RW",
      "description": "4x0050. %, Pa or l/s depending on the engineering unit."
    },
    {
      "address": 51,
      "count": 1,
      "name": "Supply fan step 2 setpoint",
      "data_type": "UInt16",
      "units": "%",
      "scale_factor": 1,
      "offset": 0,
      "access": "RW",
      "description": "4x0051. %, Pa or l/s depending on the engineering unit."
    },
    {
      "address": 52,
      "count": 1,
      "name": "Supply fan step 3 setpoint",
      "data_type": "UInt16",
      "units": "%",
      "scale_factor": 1,
      "offset": 0,
      "access": "RW",
      "description": "4x0052. %, Pa or l/s depending on the engineering unit."
    },
    {
      "address": 53,
      "count": 1,
      "name": "Supply fan maximum force setpoint",
      "data_type": "UInt16",
      "units": "%",
      "scale_factor": 1,
      "offset": 0,
      "access": "RW",
      "description": "4x0053. %, Pa or l/s depending on the engineering unit."
    },
    {
      "address": 54,
      "count": 1,
      "name": "Exhaust fan step 1 setpoint",
      "data_type": "UInt16",
      "units": "%",
      "scale_factor": 1,
      "offset": 0,
      "access": "RW",
      "description": "4x0054. %, Pa or l/s depending on the engineering unit."
    },
    {
      "address": 55,
      "count": 1,
      "name": "Exhaust fan step 2 setpoint",
      "data_type": "UInt16",
      "units": "%",
      "scale_factor": 1,
      "offset": 0,
      "access": "RW",
      "description": "4x0055. %, Pa or l/s depending on the engineering unit."
    },
    {
      "address": 56,
      "count": 1,
      "name": "Exhaust fan step 3 setpoint",
      "data_type": "UInt16",
      "units": "%",
      "scale_factor": 1,
      "offset": 0,
      "access": "RW",
      "description": "4x0056. %, Pa or l/s depending on the engineering unit."
    },
    {
      "address": 57,
      "count": 1,
      "name": "Exhaust fan maximum force setpoint",
      "data_type": "UInt16",
      "units": "%",
      "scale_factor": 1,
      "offset": 0,
      "access": "RW",
      "description": "4x0057. %, Pa or l/s depending on the engineering unit."
    },
    {
      "address": 59,
      "count": 1,
      "name": "Air quality setpoint",
      "data_type": "UInt16",
      "units": "ppm",
      "scale_factor": 1,
      "offset": 0,
      "access": "RW",
      "description": "4x0059. Air-quality setpoint in ppm."
    },
    {
      "address": 61,
      "count": 1,
      "name": "Room humidity relative",
      "data_type": "UInt16",
      "units": "%",
      "scale_factor": 0.1,
      "offset": 0,
      "access": "RW",
      "description": "4x0061. Factor 10."
    },
    {
      "address": 65,
      "count": 1,
      "name": "Air quality",
      "data_type": "Int16",
      "units": "ppm",
      "scale_factor": 0.1,
      "offset": 0,
      "access": "RW",
      "description": "4x0065. Factor 10."
    },
    {
      "address": 78,
      "count": 1,
      "name": "Boost compensation time",
      "data_type": "UInt16",
      "units": "min",
      "scale_factor": 1,
      "offset": 0,
      "access": "RW",
      "description": "4x0078. Boost compensation time in minutes."
    },
    {
      "address": 84,
      "count": 1,
      "name": "Supply air compensation temperature delta",
      "data_type": "Int16",
      "units": "K",
      "scale_factor": 0.1,
      "offset": 0,
      "access": "RW",
      "description": "4x0084. Factor 10."
    },
    {
      "address": 85,
      "count": 1,
      "name": "Winter compensation temperature delta",
      "data_type": "Int16",
      "units": "K",
      "scale_factor": 0.1,
      "offset": 0,
      "access": "RW",
      "description": "4x0085. Factor 10."
    },
    {
      "address": 90,
      "count": 1,
      "name": "Maximum speed defrost",
      "data_type": "Int16",
      "units": "%",
      "scale_factor": 0.1,
      "offset": 0,
      "access": "RW",
      "description": "4x0090. Factor 10."
    },
    {
      "address": 91,
      "count": 1,
      "name": "Minimum fresh air",
      "data_type": "UInt16",
      "units": "%",
      "scale_factor": 1,
      "offset": 0,
      "access": "RW",
      "description": "4x0091. 0...100 %."
    },
    {
      "address": 96,
      "count": 1,
      "name": "Preheating position Y1",
      "data_type": "UInt16",
      "units": "%",
      "scale_factor": 1,
      "offset": 0,
      "access": "RW",
      "description": "4x0096. 0...100 %."
    },
    {
      "address": 97,
      "count": 1,
      "name": "Preheating position Y2",
      "data_type": "UInt16",
      "units": "%",
      "scale_factor": 1,
      "offset": 0,
      "access": "RW",
      "description": "4x0097. 0...100 %."
    },
    {
      "address": 103,
      "count": 1,
      "name": "Preheating 2 position Y1",
      "data_type": "UInt16",
      "units": "%",
      "scale_factor": 1,
      "offset": 0,
      "access": "RW",
      "description": "4x0103. 0...100 %."
    },
    {
      "address": 104,
      "count": 1,
      "name": "Preheating 2 position Y2",
      "data_type": "UInt16",
      "units": "%",
      "scale_factor": 1,
      "offset": 0,
      "access": "RW",
      "description": "4x0104. 0...100 %."
    },
    {
      "address": 108,
      "count": 1,
      "name": "Fan compensation humidity",
      "data_type": "UInt16",
      "units": "%",
      "scale_factor": 0.1,
      "offset": 0,
      "access": "RW",
      "description": "4x0108. Factor 10."
    },
    {
      "address": 110,
      "count": 1,
      "name": "Fan slave offset",
      "data_type": "UInt16",
      "units": "l/s",
      "scale_factor": 0.1,
      "offset": 0,
      "access": "RW",
      "description": "4x0110. l/s; the document prints 'factor 10', so the raw value is divided by 10."
    },
    {
      "address": 113,
      "count": 1,
      "name": "Maximum deviation supply humidity",
      "data_type": "UInt16",
      "units": "%",
      "scale_factor": 0.1,
      "offset": 0,
      "access": "RW",
      "description": "4x0113. Factor 10; %rH or g/kg."
    },
    {
      "address": 114,
      "count": 1,
      "name": "Maximum deviation room humidity",
      "data_type": "UInt16",
      "units": "%",
      "scale_factor": 0.1,
      "offset": 0,
      "access": "RW",
      "description": "4x0114. Factor 10; %rH or g/kg."
    },
    {
      "address": 115,
      "count": 1,
      "name": "Maximum deviation supply fan",
      "data_type": "UInt16",
      "units": "%",
      "scale_factor": 1,
      "offset": 0,
      "access": "RW",
      "description": "4x0115. %, Pa or l/s depending on the engineering unit."
    },
    {
      "address": 116,
      "count": 1,
      "name": "Maximum deviation exhaust fan",
      "data_type": "UInt16",
      "units": "%",
      "scale_factor": 1,
      "offset": 0,
      "access": "RW",
      "description": "4x0116. %, Pa or l/s depending on the engineering unit."
    },
    {
      "address": 126,
      "count": 1,
      "name": "Summer fan compensation delta",
      "data_type": "Int16",
      "units": "%",
      "scale_factor": 1,
      "offset": 0,
      "access": "RW",
      "description": "4x0126. -100...100 %."
    },
    {
      "address": 129,
      "count": 1,
      "name": "Winter fan compensation delta",
      "data_type": "Int16",
      "units": "%",
      "scale_factor": 1,
      "offset": 0,
      "access": "RW",
      "description": "4x0129. -100...100 %."
    },
    {
      "address": 201,
      "count": 1,
      "name": "Cooling controller gain",
      "data_type": "Int16",
      "units": "",
      "scale_factor": 1,
      "offset": 0,
      "access": "RW",
      "description": "4x0201. Proportional gain of the cooling controller."
    },
    {
      "address": 202,
      "count": 1,
      "name": "Cooling controller integral time",
      "data_type": "UInt16",
      "units": "s",
      "scale_factor": 1,
      "offset": 0,
      "access": "RW",
      "description": "4x0202. 0...x s."
    },
    {
      "address": 203,
      "count": 1,
      "name": "Cooling controller differential time",
      "data_type": "UInt16",
      "units": "s",
      "scale_factor": 1,
      "offset": 0,
      "access": "RW",
      "description": "4x0203. 0...x s."
    },
    {
      "address": 204,
      "count": 1,
      "name": "Heat recovery controller gain",
      "data_type": "Int16",
      "units": "",
      "scale_factor": 1,
      "offset": 0,
      "access": "RW",
      "description": "4x0204. Proportional gain of the heat-recovery controller."
    },
    {
      "address": 205,
      "count": 1,
      "name": "Heat recovery controller integral time",
      "data_type": "UInt16",
      "units": "s",
      "scale_factor": 1,
      "offset": 0,
      "access": "RW",
      "description": "4x0205. 0...x s."
    },
    {
      "address": 206,
      "count": 1,
      "name": "Heat recovery controller differential time",
      "data_type": "UInt16",
      "units": "s",
      "scale_factor": 1,
      "offset": 0,
      "access": "RW",
      "description": "4x0206. 0...x s."
    },
    {
      "address": 216,
      "count": 1,
      "name": "Heating controller gain",
      "data_type": "Int16",
      "units": "",
      "scale_factor": 1,
      "offset": 0,
      "access": "RW",
      "description": "4x0216. Proportional gain of the heating controller."
    },
    {
      "address": 217,
      "count": 1,
      "name": "Heating controller integral time",
      "data_type": "UInt16",
      "units": "s",
      "scale_factor": 1,
      "offset": 0,
      "access": "RW",
      "description": "4x0217. 0...x s."
    },
    {
      "address": 218,
      "count": 1,
      "name": "Heating controller differential time",
      "data_type": "UInt16",
      "units": "s",
      "scale_factor": 1,
      "offset": 0,
      "access": "RW",
      "description": "4x0218. 0...x s."
    }
  ],
  "combined_registers": [],
  "notes": "Source: Siemens \"Climatix - Modbus communication, slave mode - Reference addresses for Climatix AHU application V3.3x\", CB1Y3961en, 2017-11-17 (Building Technologies). Copy read: covent.no/wp-content/uploads/2021/05/climatix_ahu_modbus_reference-addresses_y3961en.pdf, SHA-256 1f822b6d736ed28f8173ebdc6d9d87949df7d3cf8d0287cf2564e90d6e26b948. The device is a Climatix POL638/POL687 controller running the standard AHU application V3.3x, the controller inside many OEM air handling units; the map is the application's, so it is fixed per application version, not per installation. Transport: Modbus TCP, port 502 - the companion integration guide CB1J3960en 2.5 states \"Modbus TCP in Climatix uses the TCP port 502. This port number is not changeable\", and its 3.3 (Commission internal Modbus TCP, step 2: \"This has no influence for Modbus TCP\") is why the unit id here is only a placeholder. Register numbers are the document's reference addresses (3x0072, 4x0020...); 3.1 states that all address types start at 1 and that a master starting at 0 must subtract 1, so the seed is one_based and stores the printed numbers. Rows marked \"(factor 10)\" carry scale 0.1. All ranges are printed as \"-x.y - +x.y\", so no min/max is transcribed as a value. Omitted by scope: the coil status block, the input states 1x0001...1x0053 (duplicated by 3x0005...3x0008), the bit legends of 3x0017...3x0037, the bit-coded 4x0001 and 4x0015...4x0019, the setpoint rows 4x0060...4x0089 and 4x0092...4x0109, 4x0111/4x0112, the trend rows 4x0120...4x0129, the PID tables from 4x0219, the manual-override block 4x0911 and up, and input registers 3x0229 plus the factor-1 energy copies 3x0240...3x0248 and the supply/exhaust fan blocks 3x0251...3x0280."
}
