{
  "spec_version": 1,
  "slug": "eastron-sdm54-m",
  "manufacturer": "Eastron",
  "model": "SDM54-M / SDM54-2T (SDM54 series, 100 A direct connection)",
  "category": "Energy meter",
  "supplier_url": "https://www.eastrongroup.com/eastrongroup/2024/08/21/eastronsdm54seriesusermanualv1.2.pdf",
  "default_configuration": {
    "protocol": "modbus_rtu",
    "unit_id": 1,
    "addressing": "zero_based",
    "byte_order": "BigEndian",
    "word_order": "HighFirst",
    "native_interface": "rs485",
    "serial": {
      "baud_rate": 9600,
      "parity": "None",
      "data_bits": 8,
      "stop_bits": 1
    }
  },
  "coils": [],
  "discrete_inputs": [],
  "input_registers": [
    {
      "address": 0,
      "count": 2,
      "name": "Voltage L1-N",
      "data_type": "Float32",
      "units": "V",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 2,
      "count": 2,
      "name": "Voltage L2-N",
      "data_type": "Float32",
      "units": "V",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 4,
      "count": 2,
      "name": "Voltage L3-N",
      "data_type": "Float32",
      "units": "V",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 6,
      "count": 2,
      "name": "Current L1",
      "data_type": "Float32",
      "units": "A",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 8,
      "count": 2,
      "name": "Current L2",
      "data_type": "Float32",
      "units": "A",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 10,
      "count": 2,
      "name": "Current L3",
      "data_type": "Float32",
      "units": "A",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 12,
      "count": 2,
      "name": "Active power L1",
      "data_type": "Float32",
      "units": "W",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 14,
      "count": 2,
      "name": "Active power L2",
      "data_type": "Float32",
      "units": "W",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 16,
      "count": 2,
      "name": "Active power L3",
      "data_type": "Float32",
      "units": "W",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 18,
      "count": 2,
      "name": "Apparent power L1",
      "data_type": "Float32",
      "units": "VA",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 20,
      "count": 2,
      "name": "Apparent power L2",
      "data_type": "Float32",
      "units": "VA",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 22,
      "count": 2,
      "name": "Apparent power L3",
      "data_type": "Float32",
      "units": "VA",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 24,
      "count": 2,
      "name": "Reactive power L1",
      "data_type": "Float32",
      "units": "VAr",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 26,
      "count": 2,
      "name": "Reactive power L2",
      "data_type": "Float32",
      "units": "VAr",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 28,
      "count": 2,
      "name": "Reactive power L3",
      "data_type": "Float32",
      "units": "VAr",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 30,
      "count": 2,
      "name": "Power factor L1",
      "data_type": "Float32",
      "units": "",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 32,
      "count": 2,
      "name": "Power factor L2",
      "data_type": "Float32",
      "units": "",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 34,
      "count": 2,
      "name": "Power factor L3",
      "data_type": "Float32",
      "units": "",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 36,
      "count": 2,
      "name": "Phase angle L1",
      "data_type": "Float32",
      "units": "°",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 38,
      "count": 2,
      "name": "Phase angle L2",
      "data_type": "Float32",
      "units": "°",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 40,
      "count": 2,
      "name": "Phase angle L3",
      "data_type": "Float32",
      "units": "°",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 42,
      "count": 2,
      "name": "Average line-to-neutral voltage",
      "data_type": "Float32",
      "units": "V",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 46,
      "count": 2,
      "name": "Average line current",
      "data_type": "Float32",
      "units": "A",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 48,
      "count": 2,
      "name": "Sum of line currents",
      "data_type": "Float32",
      "units": "A",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 52,
      "count": 2,
      "name": "Total system active power",
      "data_type": "Float32",
      "units": "W",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 56,
      "count": 2,
      "name": "Total system apparent power",
      "data_type": "Float32",
      "units": "VA",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 60,
      "count": 2,
      "name": "Total system reactive power",
      "data_type": "Float32",
      "units": "VAr",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 62,
      "count": 2,
      "name": "Total system power factor",
      "data_type": "Float32",
      "units": "",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 66,
      "count": 2,
      "name": "Total system phase angle",
      "data_type": "Float32",
      "units": "°",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 70,
      "count": 2,
      "name": "Frequency",
      "data_type": "Float32",
      "units": "Hz",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 72,
      "count": 2,
      "name": "Total imported active energy",
      "data_type": "Float32",
      "units": "kWh",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 74,
      "count": 2,
      "name": "Total exported active energy",
      "data_type": "Float32",
      "units": "kWh",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 76,
      "count": 2,
      "name": "Total imported reactive energy",
      "data_type": "Float32",
      "units": "kVArh",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 78,
      "count": 2,
      "name": "Total exported reactive energy",
      "data_type": "Float32",
      "units": "kVArh",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 80,
      "count": 2,
      "name": "Total apparent energy",
      "data_type": "Float32",
      "units": "kVAh",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 82,
      "count": 2,
      "name": "Ampere-hours",
      "data_type": "Float32",
      "units": "Ah",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 84,
      "count": 2,
      "name": "Total system power demand",
      "data_type": "Float32",
      "units": "W",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 86,
      "count": 2,
      "name": "Maximum total system power demand",
      "data_type": "Float32",
      "units": "W",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 100,
      "count": 2,
      "name": "Total system apparent power demand",
      "data_type": "Float32",
      "units": "VA",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 102,
      "count": 2,
      "name": "Maximum total system apparent power demand",
      "data_type": "Float32",
      "units": "VA",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 104,
      "count": 2,
      "name": "Neutral current demand",
      "data_type": "Float32",
      "units": "A",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 106,
      "count": 2,
      "name": "Maximum neutral current demand",
      "data_type": "Float32",
      "units": "A",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 200,
      "count": 2,
      "name": "Line-to-line voltage L1-L2",
      "data_type": "Float32",
      "units": "V",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 202,
      "count": 2,
      "name": "Line-to-line voltage L2-L3",
      "data_type": "Float32",
      "units": "V",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 204,
      "count": 2,
      "name": "Line-to-line voltage L3-L1",
      "data_type": "Float32",
      "units": "V",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 206,
      "count": 2,
      "name": "Average line-to-line voltage",
      "data_type": "Float32",
      "units": "V",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 224,
      "count": 2,
      "name": "Neutral current",
      "data_type": "Float32",
      "units": "A",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 234,
      "count": 2,
      "name": "Voltage THD L1-N",
      "data_type": "Float32",
      "units": "%",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 236,
      "count": 2,
      "name": "Voltage THD L2-N",
      "data_type": "Float32",
      "units": "%",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 238,
      "count": 2,
      "name": "Voltage THD L3-N",
      "data_type": "Float32",
      "units": "%",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 240,
      "count": 2,
      "name": "Current THD L1",
      "data_type": "Float32",
      "units": "%",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 242,
      "count": 2,
      "name": "Current THD L2",
      "data_type": "Float32",
      "units": "%",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 244,
      "count": 2,
      "name": "Current THD L3",
      "data_type": "Float32",
      "units": "%",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 248,
      "count": 2,
      "name": "Average line-to-neutral voltage THD",
      "data_type": "Float32",
      "units": "%",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 250,
      "count": 2,
      "name": "Average line current THD",
      "data_type": "Float32",
      "units": "%",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 258,
      "count": 2,
      "name": "Current demand L1",
      "data_type": "Float32",
      "units": "A",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 260,
      "count": 2,
      "name": "Current demand L2",
      "data_type": "Float32",
      "units": "A",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 262,
      "count": 2,
      "name": "Current demand L3",
      "data_type": "Float32",
      "units": "A",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 264,
      "count": 2,
      "name": "Maximum current demand L1",
      "data_type": "Float32",
      "units": "A",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 266,
      "count": 2,
      "name": "Maximum current demand L2",
      "data_type": "Float32",
      "units": "A",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 268,
      "count": 2,
      "name": "Maximum current demand L3",
      "data_type": "Float32",
      "units": "A",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 334,
      "count": 2,
      "name": "Line-to-line voltage THD L1-L2",
      "data_type": "Float32",
      "units": "%",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 336,
      "count": 2,
      "name": "Line-to-line voltage THD L2-L3",
      "data_type": "Float32",
      "units": "%",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 338,
      "count": 2,
      "name": "Line-to-line voltage THD L3-L1",
      "data_type": "Float32",
      "units": "%",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 340,
      "count": 2,
      "name": "Average line-to-line voltage THD",
      "data_type": "Float32",
      "units": "%",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 342,
      "count": 2,
      "name": "Total active energy (import + export)",
      "data_type": "Float32",
      "units": "kWh",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 344,
      "count": 2,
      "name": "Total reactive energy (import + export)",
      "data_type": "Float32",
      "units": "kVArh",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 346,
      "count": 2,
      "name": "Imported active energy L1",
      "data_type": "Float32",
      "units": "kWh",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 348,
      "count": 2,
      "name": "Imported active energy L2",
      "data_type": "Float32",
      "units": "kWh",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 350,
      "count": 2,
      "name": "Imported active energy L3",
      "data_type": "Float32",
      "units": "kWh",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 352,
      "count": 2,
      "name": "Exported active energy L1",
      "data_type": "Float32",
      "units": "kWh",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 354,
      "count": 2,
      "name": "Exported active energy L2",
      "data_type": "Float32",
      "units": "kWh",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 356,
      "count": 2,
      "name": "Exported active energy L3",
      "data_type": "Float32",
      "units": "kWh",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 358,
      "count": 2,
      "name": "Total active energy L1",
      "data_type": "Float32",
      "units": "kWh",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 360,
      "count": 2,
      "name": "Total active energy L2",
      "data_type": "Float32",
      "units": "kWh",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 362,
      "count": 2,
      "name": "Total active energy L3",
      "data_type": "Float32",
      "units": "kWh",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 364,
      "count": 2,
      "name": "Imported reactive energy L1",
      "data_type": "Float32",
      "units": "kVArh",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 366,
      "count": 2,
      "name": "Imported reactive energy L2",
      "data_type": "Float32",
      "units": "kVArh",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 368,
      "count": 2,
      "name": "Imported reactive energy L3",
      "data_type": "Float32",
      "units": "kVArh",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 370,
      "count": 2,
      "name": "Exported reactive energy L1",
      "data_type": "Float32",
      "units": "kVArh",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 372,
      "count": 2,
      "name": "Exported reactive energy L2",
      "data_type": "Float32",
      "units": "kVArh",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 374,
      "count": 2,
      "name": "Exported reactive energy L3",
      "data_type": "Float32",
      "units": "kVArh",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 376,
      "count": 2,
      "name": "Total reactive energy L1",
      "data_type": "Float32",
      "units": "kVArh",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 378,
      "count": 2,
      "name": "Total reactive energy L2",
      "data_type": "Float32",
      "units": "kVArh",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 380,
      "count": 2,
      "name": "Total reactive energy L3",
      "data_type": "Float32",
      "units": "kVArh",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 2566,
      "count": 2,
      "name": "Active power demand L1",
      "data_type": "Float32",
      "units": "W",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 2568,
      "count": 2,
      "name": "Active power demand L2",
      "data_type": "Float32",
      "units": "W",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 2570,
      "count": 2,
      "name": "Active power demand L3",
      "data_type": "Float32",
      "units": "W",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 2610,
      "count": 2,
      "name": "Maximum active power demand L1",
      "data_type": "Float32",
      "units": "W",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 2612,
      "count": 2,
      "name": "Maximum active power demand L2",
      "data_type": "Float32",
      "units": "W",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    },
    {
      "address": 2614,
      "count": 2,
      "name": "Maximum active power demand L3",
      "data_type": "Float32",
      "units": "W",
      "scale_factor": 1,
      "offset": 0,
      "access": "R"
    }
  ],
  "holding_registers": [
    {
      "address": 2,
      "count": 2,
      "name": "Demand period",
      "data_type": "Float32",
      "units": "min",
      "scale_factor": 1,
      "offset": 0,
      "access": "RW",
      "description": "Values: 0, 5, 8, 10, 15, 20, 30 or 60 minutes. Factory default 60; 0 makes the demand registers show the current value."
    },
    {
      "address": 10,
      "count": 2,
      "name": "System type",
      "data_type": "Float32",
      "units": "",
      "scale_factor": 1,
      "offset": 0,
      "access": "RW",
      "description": "Values: 1 = 1p2w, 3 = 3p4w, 4 = 1p3w. Password protected."
    },
    {
      "address": 12,
      "count": 2,
      "name": "Pulse output 1 width",
      "data_type": "Float32",
      "units": "ms",
      "scale_factor": 1,
      "offset": 0,
      "access": "RW",
      "description": "Values: 60, 100 or 200 ms. Factory default 100 ms."
    },
    {
      "address": 14,
      "count": 2,
      "name": "Password lock",
      "data_type": "Float32",
      "units": "",
      "scale_factor": 1,
      "offset": 0,
      "access": "R",
      "description": "Write any value to lock the protected registers again. Read: 0 = locked, 1 = unlocked; reading also restarts the one-minute password timeout."
    },
    {
      "address": 18,
      "count": 2,
      "name": "Network parity and stop bits",
      "data_type": "Float32",
      "units": "",
      "scale_factor": 1,
      "offset": 0,
      "access": "RW",
      "description": "Values: 0 = one stop bit, no parity (factory default); 1 = one stop bit, even parity; 2 = one stop bit, odd parity; 3 = two stop bits, no parity."
    },
    {
      "address": 20,
      "count": 2,
      "name": "Network node address",
      "data_type": "Float32",
      "units": "",
      "scale_factor": 1,
      "offset": 0,
      "access": "RW",
      "description": "Modbus slave address 1-247. Factory default 1; a restart is required before it takes effect."
    },
    {
      "address": 22,
      "count": 2,
      "name": "Pulse output 1 divisor",
      "data_type": "Float32",
      "units": "",
      "scale_factor": 1,
      "offset": 0,
      "access": "RW",
      "description": "Values, printed for kWh and kVArh alike: 0 = 400 imp/kWh, 1 = 100 imp/kWh, 2 = 10 imp/kWh, 3 = 1 kWh/imp, 4 = 0.1 imp/kWh, 5 = 0.01 imp/kWh (the document mixes the two spellings in its own list)."
    },
    {
      "address": 24,
      "count": 2,
      "name": "Password",
      "data_type": "Float32",
      "units": "",
      "scale_factor": 1,
      "offset": 0,
      "access": "W",
      "description": "Write the password (factory default 1000) to unlock the protected registers."
    },
    {
      "address": 28,
      "count": 2,
      "name": "Network baud rate",
      "data_type": "Float32",
      "units": "",
      "scale_factor": 1,
      "offset": 0,
      "access": "RW",
      "description": "Values: 0 = 2400, 1 = 4800, 2 = 9600 (factory default), 3 = 19200, 4 = 38400 baud. A restart is required before it takes effect."
    },
    {
      "address": 58,
      "count": 2,
      "name": "Display scroll time",
      "data_type": "Float32",
      "units": "s",
      "scale_factor": 1,
      "offset": 0,
      "access": "RW",
      "description": "Values: 0, 5, 10, 15, 30 or 60 s; factory default 5 s. 0 means no scroll."
    },
    {
      "address": 60,
      "count": 2,
      "name": "Backlight time",
      "data_type": "Float32",
      "units": "min",
      "scale_factor": 1,
      "offset": 0,
      "access": "RW",
      "description": "Values: 0, 5, 10, 15, 30, 60, 120 or 121 minutes; factory default 60 min. 0 = backlight on, 121 = backlight off."
    },
    {
      "address": 86,
      "count": 2,
      "name": "Pulse output 1 energy type",
      "data_type": "Float32",
      "units": "",
      "scale_factor": 1,
      "offset": 0,
      "access": "RW",
      "description": "Values: 1 = import active energy, 2 = total active energy, 4 = export active energy (factory default), 5 = import reactive energy, 6 = total reactive energy, 8 = export reactive energy."
    },
    {
      "address": 64512,
      "count": 2,
      "name": "Serial number",
      "data_type": "UInt32",
      "units": "",
      "scale_factor": 1,
      "offset": 0,
      "access": "R",
      "description": "Meter serial number, read-only."
    },
    {
      "address": 64514,
      "count": 1,
      "name": "Meter code",
      "data_type": "Hex",
      "units": "",
      "scale_factor": 1,
      "offset": 0,
      "access": "R",
      "description": "Meter code 0x0070 for the SDM54-M/-2T, read-only."
    }
  ],
  "combined_registers": [],
  "notes": "RS-485 device read natively over Modbus RTU: connect it at the factory serial settings above. Sources: Eastron \"SDM54-M/-2T Modbus Protocol Implementation V1.1\" (2021), which prints every register with its 3X/4X number and the wire address in hex, and the \"SDM54 Series Energy Meter User Manual\" 2021 V1.2 (supplier_url). The factory frame is assembled from both documents: the manual's setup menu prints Baud default 9600, Parity default None and Stop default 1 (5.3.1 lists the same options), the protocol document's RTU framing prints \"8 data bits, least significant bit sent first\", and its Network Node register (40021) prints \"1 to 247 for MODBUS Protocol, default 1\". All values are IEEE-754 Float32, most significant register first (the protocol document's default register order); 3X rows are read with function code 04 and 4X rows with 03/16. The seed carries every 3X row the document prints except 30255, which names \"Total system power factor\" with the unit \"Degrees\" and contradicts 30063, and the SDM54-2T tariff and tariff-demand block 34877-35503, which is on the -2T variant only and repeats the total-energy rows. The address holes in the seed mirror holes in the document, which itself jumps 30043 to 30047, 30049 to 30053, 30057 to 30061, 30087 to 30101 and 30107 to 30201. Of the 15 holding rows the document prints the seed carries 14 and leaves out only the write-only Reset command at 0xF010 (61456) that clears the maximum demand. Overlap with eastron-sdm630 is large and disclosed: 89 of these 105 rows sit at the same address with the same type, unit and scale, because Eastron reuses the measurement map across the SDM series, and both seeds record the same 9600 8N1 frame - but they are different documents (the 630 prints maximum import apparent demand at 0x56 where this one prints total system power demand in W), the 630 seed reaches the meter through a gateway while this one reads it natively, and this seed adds per-phase demand and extra settings."
}
